drcard
Software Review Panel
Posts: 580
|
Post by drcard on Nov 7, 2014 21:19:23 GMT -5
I have tried several times to post a thread which contains examples of commands to be entered in a Windows Command Prompt. A page pops up stating that I am blocked due to the site's security software. I placed all commands in the Insert Code function of the board and still I am blocked. I know that I have posted examples of Command Prompt entries before so I assume this is some new addition to the board. My question is simple, how can we post examples of Command Prompt entries to share with the readers of this forum. I have some very nice tips using the Command Prompt.
|
|
|
Post by Jack Teems on Nov 7, 2014 22:04:58 GMT -5
I don't have an answer but I have posted your question on the ProBoards support site and will let you know their response(s).
|
|
|
Post by Jack Teems on Nov 9, 2014 9:28:44 GMT -5
|
|
drcard
Software Review Panel
Posts: 580
|
Post by drcard on Nov 10, 2014 21:16:36 GMT -5
For those following this thread, I got the answer at the proboards support forum. It appears that the forum's security software will block any posting if that posting has commands in it. Thus, my attempts to post a tip using the Windows Command Prompt with example commands was blocked because of the example commands. The work around is to post the examples commands at pastebin.com and place the link in the post.
|
|
|
Post by laverne on Nov 11, 2014 7:08:44 GMT -5
Dana, I've been following this thread and now am wondering if you are going to post the Command Prompt tips. I have so many useful things on my computers from you. A great big thank you.
|
|